Extended Deadline - CFP SII 2013

    GITIA -   Conferences, Events

2nd ARGENTINE SYMPOSIUM ON INDUSTRIAL INFORMATICS - SII 2013

CALL FOR PAPERS

http://www.42jaiio.org.ar/sii

September 17, 2013 Córdoba – Argentina

INTRODUCTION

The Argentine Symposium on Industrial Informatics (SII) is an open forum for researchers, practitioners and students that use and/or develop models, applications and industrial computer systems, both in academic and professional settings, whose main objective is fostering the interaction and exchange of experiences in these environments. It is therefore expected that the participants of SII exchange ideas and share the results of their professional and research activities in the area of Industrial Informatics, in sessions and discussion panels.

The Argentine Symposium on Industrial Informatics SII 2013 will be held as part of the 42nd Argentine Conference on Informatics (42ndJAIIO), on September 17th 2013 in Córdoba, Argentina.

In this edition, the topics of interest include the development of models and information systems applied to:

  • Supply chains: models, algorithms, applications and solutions that support the efficient management of supply chains by means of ICT.
  • Manufacturing Processes: computational simulation, imaging technologies, electronics and communications, computer integrated systems, automation and robotics, technologies related to the development of methods and processes associated to production, among others.
  • Enterprise-wide systems. Integration, optimization and control of complex systems.

TOPICS OF INTEREST

Works sent to SII 2013 should report relevant research results and industrial experiences in the following (or other related) areas:

  • Decision Support Systems.
  • Production control and monitoring.
  • Automation and industrial robotics.
  • Complex Systems.
  • Information Systems (ERP, CRM, DRM, MRP, SCEM, etc.) and Industrial Platforms.
  • Supply Chain and Systems modeling.
  • Computer Integrated Manufacturing systems (CIM).
  • Software and Systems Architectures in Industrial Applications.
  • Real Time and Transactional Systems in industry.
  • Industrial information networks.
  • Planning, Supervision, Control and Process Optimization.
  • Computational Simulation of Processes.
  • Quality Control.
  • Productivity Improvement in Industrial Environments.
  • Logistics and Supply Chain Management.
  • Planning, Control and Optimization in Supply Chains.
  • Performance Measurement and Benchmarking.
  • Modeling based on Software Agents.
  • Cloud Computing in Industrial Applications.
  • Business-to-Business (B2B) Information Systems.
  • Traceability and Event Management.
  • Interoperability and Integration of Systems.
  • RFID and EPC.
  • Collaborative Systems in Industry.
  • Artificial Intelligence in Industrial Applications.
  • Sustainability, Green Supply Chain Management, Green Production.
  • Lean Manufacturing and Lean Supply Chains.
  • Innovation Engineering and Management.
  • Industrial applications of Geographic Information Systems (GIS)

IMPORTANT DATES

Extended deadline for paper submission: April 29, 2013 Notification of acceptance/rejection: July 1, 2013 Deadline for “camera-ready” submissions: July 15, 2013 Registration of one author for accepted papers: July 29, 2013

PAPER SUBMISSION

Authors are invited to send high-quality papers related to the topics and areas mentioned, according to the LNCS (Lecture Notes in Computer Science) format. Templates can be downloaded from:

http://www.springer.de/comp/lncs/authors.html

Papers can be written in English, Spanish ore Portuguese, should not exceed 12 pages, including tables, figures and references, and must be submitted in PDF format. All the papers will be carefully reviewed by members of the Program Committee, considering their originality, contribution, technical quality and clarity. The works submitted must not have been previously published, nor be under review on another conference, symposium or journal.

At least one of the authors of each accepted paper must register to the conference before the deadline for camera ready submissions in order for the work to be considered for publication.

Detailed instructions for paper submission are available in the SII website http://www.42jaiio.org.ar/sii

Special issue: Iberoamerican Journal of Industrial Engineering (IJIE)

The authors of the best papers of SII 2013 will be invited to submit extended versions of their manuscripts, to be published in a special issue of the Iberoamerican Journal of Industrial Engineering (IJIE):

http://periodicos.incubadora.ufsc.br/index.php/IJIE/index

CHAIRMEN

Martín Gonzalo Marchetta (Universidad Nacional de Cuyo, Mendoza, Argentina) Juan Matías Novas (CIEM-CONICET, Córdoba, Argentina)

PROGRAM COMMITTEE

  • Alberto Bandoni (PLAPIQUI-CONICET, Universidad Nacional del Sur, Argentina)
  • Andrés Barrea (FAMAF, UNC, Córdoba, Argentina)
  • Orlando Boiteux (Universidad Nacional de Cuyo, Mendoza, Argentina)
  • Gustavo Boroni (UNCPBA-CONICET, Buenos Aires, Argentina)
  • Diego Cafaro (INTEC-CONICET, UNL, Santa Fe, Argentina)
  • Mauricio Camargo (Institut National Polytechnique de Lorraine, Nancy, France)
  • Federico Casanova (PLADEMA, UNCPBA, Argentina)
  • Nelson Casarotto Filho (Universidade Federal de Santa Catarina, Brazil)
  • Omar Chiotti (INGAR-CONICET, UTN, Santa Fe, Argentina)
  • Gabriela Corsano (INGAR-CONICET, UTN, Santa Fe, Argentina)
  • Mariana del Fresno (PLADEMA, UNCPBA, Argentina)
  • María Soledad Díaz (PLAPIQUI-CONICET, Universidad Nacional del Sur, Argentina)
  • Rodolfo García Flores (CSIRO, Australia)
  • Sebastián García-Dastugue (Universidad de San Andrés, Buenos Aires, Argentina)
  • Silvio Gonnet (INGAR-CONICET, UTN, Santa Fe, Argentina)
  • Raymundo Forradellas (Universidad Nacional de Cuyo, Mendoza, Argentina)
  • Gabriela Henning (INTEC-CONICET, UNL, Santa Fe, Argentina)
  • Pablo Marchetti (Carnegie Mellon University, USA)
  • César Martínez (Universidad Nacional del Litoral, Santa Fe, Argentina)
  • Sergio Maturana (Universidad Católica de Chile, Santiago, Chile)
  • Frédérique Mayer (Institut National Polytechnique de Lorraine, Nancy, France)
  • Fernando Daniel Mele (Universidad Nacional de Tucumán, Tucumán, Argentina)
  • Marcelo Montagna (INGAR-CONICET, UTN, Santa Fe, Argentina)
  • Vicente Antonio Mut (INAUT, Fac. de Ingeniería, Univ. Nac. de San Juan, Argentina)
  • Jorge Núñez McLeod (UNCuyo-CONICET, Mendoza, Argentina)
  • Bernardo Páez de la Torre (CARTOCOR, Universidad Nacional del Litoral, Argentina)
  • H. Daniel Patiño (INAUT, Fac. de Ingeniería, Univ. Nac. de San Juan, Argentina)
  • Alfredo Puglesi (Universidad Nacional de Cuyo, Mendoza, Argentina)
  • Selva Rivera (Universidad Nacional de Cuyo, Mendoza, Argentina)
  • Analía Rodriguez (INGAR-CONICET, UTN, Santa Fe, Argentina)
  • Sebastián Rodríguez (CITAT-UTN, Tucumán, Argentina)
  • Enrique Salomone (INGAR-CONICET, UTN, Santa Fe, Argentina)
  • Paul Valckenaers (Katholieke Universitet Leuven, Belgium)
  • Esbeth Van Dyk (CSIR, South Africa)
  • Marcelo Venere (CNEA-CONICET, UNCPBA, Argentina)
  • Adrián Will (Univ. Nac. de Tucumán, CITAT-UTN, Argentina)
  • Cecilia Zanni-Merk (INSA Strasbourg, France)

Work with Us

We are always interested in new challenges and looking for new motivated people to work with.

If you are interested in colaborated with us, please contact us.

About Us

GITIA was founded on 2008 in order to promote and apply recent research works on advanced technologies to different of domains. Our main application areas cover collaborative work, decision-helping tools and distributed problem solving.